1. The core maintenance objectives of offshore cranes
Centered on resisting marine environmental erosion, strengthening the equipment's corrosion resistance. Improve the operational reliability of marine cranes through precise maintenance, reduce the probability of sudden failures, ensure the continuity of offshore operations, and achieve life-cycle cost optimization of the equipment.
2. The Phased Maintenance Strategies of Marine Crane
(1) High-frequency Basic Maintenance (Daily)
- Multi-dimensional cleaning: Use high-pressure fresh water to flush the body surface, focusing on removing salt accumulation in grooves and gaps. Clean foreign matters between slewing bearing gears with a soft brush. Wipe off residual water immediately after cleaning.
- Intelligent condition monitoring: An infrared thermometer detects the temperature of key electrical cabinet contacts, a vibration detector analyzes the hydraulic pump's operating status, and a cloud service uploads abnormal data for real-time warning.
- Sealing reinforcement inspection: Apply waterproof sealant to cable threading holes, observation windows, and other sealed areas, replace aging seal strips, and ensure the protection class meets standards.
(2) In-depth special maintenance of offshore cranes (Weekly)
- Anti-corrosion performance upgrade: Re-treat damaged coating areas, grind the rust layer, spray zinc powder-containing epoxy primer and fluorocarbon topcoat, and install sacrificial anode protection devices on key structural parts.
- Component performance optimization: Disassemble and clean the pulley group bearings, use an ultrasonic cleaner to remove oil and salt crystals, and inject food-grade lubricating grease during assembly to prevent marine environmental pollution.
- System performance testing: Simulate heavy-load conditions to test hydraulic system pressure fluctuations, use an oil particle counter to detect hydraulic oil cleanliness, and start a three-stage filtration cycle when exceeding the standard.
(3) Systematic Comprehensive Maintenance of ship crane(Monthly)
- Non-destructive testing upgrade: Combine magnetic particle inspection with phased array ultrasonic technology to visualize boom welds, generate 3D defect maps, and accurately locate micro-cracks.
- Safety redundancy verification: Conduct interlock testing of the dual limit system, artificially create signal interference, and examine backup safety devices' automatic switching capability and response speed.
- Environmental protection maintenance management: Collect hazardous wastes such as waste oil and waste filters, store them classified in leak-proof containers, contact qualified recycling units for disposal, and establish a transfer document ledger.
3. Digital Management System of hydraulic crane
Construct an IoT maintenance platform, collect real-time data on equipment vibration, temperature, stress, etc., through sensors, use AI algorithms to predict component remaining life, automatically generate personalized maintenance work orders, and achieve precise push and closed-loop management of maintenance tasks.
4. Strengthen Safety Specifications
- Formulate a tidal operation maintenance guide, specify high-risk operations such as prohibiting climbing the marine crane during high tide, and set up a tidal warning reminder function.
- Implement a two-person mutual inspection system, where key maintenance steps require confirmation and signature by two persons to reduce the risk of human error.
- Carry out fall prevention and electric shock emergency drills regularly and update the safety training content for maintenance personnel in marine environments every quarter.
Our Products








