The safety inspection before the operation of over-height lifting frame is a key link to ensure the safety of hoisting operations. It must be carried out in strict accordance with specifications. The following are five core safety inspection steps that must be completed:
1. Inspection of the integrity of the spreader's main structure
- Focus on checking whether the main structure of the over-height lifting frame (such as crossbeams, hooks, chains, steel wire ropes, pulleys, etc.) has defects such as **cracks, deformation, and wear**.
- For example: Steel wire ropes should be checked for broken wires, kinks, and rust, and whether the wear degree exceeds safety standards (such as the number of broken wires in a single strand exceeding 10%); Hooks should be free of plastic deformation and cracks, and the increase in opening degree should not exceed 10% of the original size. - Check whether the connecting parts (such as bolts and pins) are tight and whether there is looseness, falling off, or damage to ensure that all parts are connected reliably.
2. Inspection of the function of safety protection devices
- Check the limit devices, including lifting height limiters, amplitude limiters, etc., to ensure they can cut off the power when the spreader reaches the limit position to prevent over-range operation.
- Check the load limiter: Verify that it can accurately monitor the hoisting load, and when the load exceeds the rated value, it can issue an alarm and stop the lifting action to avoid overloading.
- Check the braking device, including the lifting and running mechanism brake. Test whether its braking effect is reliable and whether the brake clearance meets the requirements to prevent the over-height lifting frame from slipping or sliding.
3. Inspection of hydraulic/electrical system operation
- Hydraulic system: Check whether the oil level in the fuel tank is sufficient and whether the oil is contaminated; Check whether the pipelines and joints are leaking, whether the hydraulic pump and oil cylinder work normally, and whether the pressure is within the specified range to ensure that the over-height lifting frame moves smoothly without jamming.
- Electrical system: Check whether the cables and wires are damaged or aging and whether the terminals are firm. Also, check whether the controller and button operations are sensitive, whether the indicator lights display normally, and whether the grounding protection is reliable to prevent electric leakage or out-of-control conditions.
4. Inspection of auxiliary components and supporting equipment
- Check the auxiliary components of the over-height lifting frame, such as slings, lifting belts, shackles, etc., to ensure that their specifications match the hoisting load, are free of damage and corrosion, and meet safety standards (such as no tearing of lifting belts, no deformation of shackles).
- Check supporting equipment: If the over-height lifting frame is used with cranes, tower cranes, and other equipment, it is necessary to confirm that the connecting parts (such as trunnions and hooks) are compatible and that the equipment's operating status is normal to avoid problems with supporting equipment that could affect the spreader's safety.
5. Inspection of operating environment and surrounding conditions
- Check the operation site: Ensure that the ground is flat and solid, can bear the weight of the over-height lifting frame and the load, and is free of water and obstacles; For high-altitude operations, confirm that there are no overhead wires (or keep a safe distance) or obstacles within the operation radius to avoid collision.
- Check meteorological conditions: Confirm that there is no severe weather such as heavy rain, strong wind (wind speed exceeding the safety limit, for example, cranes usually require wind speed ≤10.8m/s), heavy fog during operation, to prevent hoisting out of control due to environmental factors.
- Check the surrounding safety: Clear irrelevant personnel in the operation area, set up warning signs and warning lines, ensure that no one stays within the hoisting range, and clarify the communication signals between the commander and the operator (such as gestures, walkie-talkies) to ensure that the command transmission is precise and accurate.
Through the above five inspections, potential safety hazards of ultra-high frame spreaders can be fully identified, ensuring that all links meet safety requirements before operation, and reducing the risk of accidents from the source. Before the operation, professional personnel must record the inspection results item by item and confirm there is no problem before starting the operation. If hidden dangers are found, they must be rectified before use.
Our over height lifting frame









