Dust-proof funnels play a key role in the green operations of ports by addressing dust pollution issues in different operational links through precision dust control designs. The specific application scenarios are as follows:
1. Ship Unloading Operations: Solving Dust Emission During Transfer from "Cargo Hold to Port Equipment"
During port ship unloading, materials such as coal and ore must be dropped into port transfer equipment (such as belt conveyors and temporary storage hoppers) after being grabbed by ship unloaders from cargo holds. This process generates a large amount of "impact dust" due to the **5-10 meter high drop** and high-speed impact of materials, which is easily spread by sea winds.
Functions of dust-proof funnels:
- - Acting as a "sealed transfer hub" between ship unloaders and port equipment, the top is connected to the ship unloader hopper through a telescopic sealing cover, and the bottom is connected to the belt conveyor via a closed chute, forming a fully enclosed channel to prevent materials from being exposed to the air.
- - Inclined buffer plates (with an angle of 30°-45°) are installed inside the funnel, turning the "free fall" of materials into "sliding along the plate". This reduces the impact speed by more than 60%, minimizing dust generation from the source.
- Some funnels are integrated with negative pressure air suction devices, which draw residual dust inside into the port's central dust removal system, ensuring that the dust concentration in the ship unloading area is ≤ 2mg/m³ (meeting the *Emission Standards for Air Pollutants from Port Bulk Cargo Terminals*).
2. Yard Storage: Replacing Open-air Stockpiling to Block "Wind-blown Dust"
When traditional ports store bulk materials (such as coal and grain) in open air, "wind erosion dust" occurs in dry seasons or windy weather. Dust particles smaller than 100μm can be blown several kilometers away, a significant cause of excessive PM10 in areas around ports.
Functions of dust-proof funnels:
- - Serving as "closed temporary storage units" to replace open-air stockpiles: The funnels adopt an all-steel sealed structure, with only a feed inlet on the top (equipped with a pneumatic sealing cover that closes immediately after feeding). The side walls are seamless, which can completely block the direct wind blowing on the materials.
- - For materials such as grain that require ventilation, the top of the funnel is designed with air vents with filters, which not only meet the breathing needs of the materials but also prevent dust from escaping. Practice shows that using dust-proof funnels for temporary storage can reduce dust emissions in the yard by more than 90%.
3. Loading Operations (onto Trucks/Ships): Eliminating Dust Leakage at the Junction of "Funnel and Transport Vehicle"
When loading materials from port hoppers onto trucks, trains, or barges, the **0.5-2 meter gap** between the hopper and the transport vehicle causes a "dust cloud" as materials fall. This problem is more prominent for dry materials such as cement and fly ash.
Functions of dust-proof funnels:
- Equipped with a "telescopic sealed discharge pipe": During unloading, the steel pipe can extend downward into the transport vehicle (such as the bottom of a truck hopper), reducing the drop to less than 0.3 meters and minimizing impact dust.
- The end of the discharge pipe is equipped with rubber dust-proof skirts, which form a "flexible seal" when in contact with the transport vehicle. Combined with the negative pressure system at the top of the funnel, all escaping dust is recovered, achieving "zero visible dust during loading operations".
4. Belt Conveyor Transfer: Resolving Dust Emission at "Material Drop Points"
In the port belt conveyor system, when materials are transferred from one belt to another at the "transfer point", continuous dust is generated due to the "centrifugal scattering" of materials when they leave the belt and the "secondary drop". For high-speed belts, several kilograms of dust can escape per hour.
Functions of dust-proof funnels:
- - Acting as a "closed transition device" for belt transfer, materials from the upstream belt directly fall into the funnel and are accurately guided to the downstream belt through internal guide grooves, avoiding material splashing.
- Wear-resistant dust-proof curtains (composed of multiple rubber plates) are installed at the joints between the funnel and the upstream and downstream belts, which do not affect the operation of the belts while preventing dust from escaping through gaps. - A dust suction port is set at the top to control the internal dust concentration below 1mg/m³, reducing dust wear on the belt conveyor motor and bearings, and extending the equipment life by more than 30%.
5. Bulk Cargo Loading onto Ships: Precision Dust Control Adapting to "Ship Hold Hatches"
Traditional open hoppers are prone to material spillage and dust emission due to misalignment with the ship hold hatches when loading materials such as ore and chemical fertilizers onto bulk carriers. Especially on rainy days, material caking due to moisture can block discharge ports, worsening dust problems.
Functions of dust-proof funnels:
- - Adopting a "movable sealed docking" design: The bottom of the funnel is equipped with a rotatable telescopic discharge arm, which can flexibly adjust the angle according to the position of the ship hold. The discharge port is tightly sealed with the edge of the hold hatch through a rubber sealing ring.
- Equipped with a variable-frequency discharge valve, it can adjust the discharge speed in real time (0-500 tons/hour) according to the hold capacity, avoiding dust and spillage caused by material "gushing."
- For wet materials, the inner wall of the funnel is coated with a polyurethane anti-sticking layer to reduce material residue. Meanwhile, a vibrator (low-frequency vibration) is integrated to prevent blockage due to caking, indirectly reducing the dust generated during dredging operations.
Summary Through the triple design of "sealed isolation, buffer deceleration, and active dust removal", dust-proof funnels build a "full-process dust-free channel" in core port links such as ship unloading, temporary storage, transfer, and loading. They directly reduce dust emissions (with an overall dust reduction efficiency of over 85%) and lower the port's environmental compliance costs, equipment maintenance costs, and health risks for workers, making them an indispensable key equipment in constructing "green ports".
Our products








