Operation frequency and intensity: important factors affecting the selection of offshore cranes

May 22, 2025

Leave a message

The operating environment of offshore cranes is complex and changeable. In addition to sea conditions and climate factors, operating frequency and intensity are key considerations for model selection. Different operating frequencies and intensities propose differentiated requirements for the offshore cranes' structural strength, power performance, reliability, etc., and targeted selection needs to be made in combination with the characteristics of offshore working conditions.

 

Low operation frequency and intensity scenarios

 

1. Scenario Analysis

 

Low operation frequency and intensity scenarios are common in marine scientific research auxiliary operations, occasional material lifting on small islands, and emergency maintenance of offshore platforms. In such scenarios, the daily operation time of the offshore crane is usually no more than 2 hours, the number of lifting times is small, the load weight is light and stable, the equipment operating load is low, and the wear is relatively slow. At the same time, due to infrequent operations, the equipment is idle for a long time, and the corrosion effect of high salt spray and humid environment on the equipment needs to be considered.

 

2. Selection points

 

1. Lightweight and anti-corrosion design: To reduce the weight and cost of offshore cranes, such as small ship deck cranes, choose lightweight aluminum alloy or high-strength low-alloy steel. At the same time, heavy anti-corrosion treatment is performed on metal parts, such as thermal spraying of zinc-aluminum coatings and coating of epoxy asphalt paint, to enhance their ability to resist seawater corrosion.

 

2. Simple power system: Equipped with low-power, energy-saving power devices, such as small electric hydraulic systems or diesel-electric hybrid drives, to meet basic lifting and luffing requirements, reducing energy consumption and maintenance costs.

 

3. Basic protection and storage measures: The equipment is equipped with a simple windproof and rainproof cover to seal and protect key components when shut down; when idle for a long time, the offshore crane must be retracted indoors or covered. It must also be lubricated and maintained regularly to prevent parts from rusting and jamming.

Medium Operation Frequency and Intensity Scenarios

 

1. Scenario Analysis

 

Moderate operation frequency and intensity are common in offshore port loading, unloading, and offshore wind power installation auxiliary operations. The ship crane operates for about 4 to 8 hours a day, with frequent lifting times and medium load weight, but it needs to cope with intermittent strong winds, waves, and other sea conditions. The equipment is in continuous operation, and key components are prone to fatigue and wear, so high requirements are placed on their stability and reliability.

 

(II) Selection points

 

1. Wind and wave resistance and durable structure: Choose marine cranes with good wind and wave resistance, such as those with anti-tilt devices. Optimize the base structure and increase the counterweight to improve stability in a shaking environment. High-strength steel manufactures key load-bearing components, strengthens the welds, and enhances structural fatigue resistance.

 

2. Stable and efficient power system: The equipment should have a medium-power, high-reliability power system, such as a variable frequency speed regulation hydraulic drive, to ensure stable lifting and rotation speed under different sea conditions and improve operating efficiency. At the same time, a backup power source (such as a small diesel generator) should be set up to ensure the regular operation of the equipment in emergencies.

 

3. Intelligent monitoring and maintenance design: A special monitoring system for the marine environment is installed to monitor the stress, corrosion status, hydraulic system pressure, oil temperature, and other parameters of the key components of the equipment in real-time; a modular design is adopted to facilitate the rapid replacement of worn parts; a remote diagnosis function is configured to understand the equipment operation status timely and reduce downtime for maintenance.

 

High Operation Frequency and Intensity Scenarios

 

1. Scenario Analysis

 

High-frequency and high-intensity operation scenarios are mainly concentrated in large container deep-water ports, offshore oil and gas platform material transfer, and other fields. Offshore Cranes need to operate 24 hours a day, with a large number of lifting times, large load weights, and frequent changes, and face the dual challenges of severe sea conditions (such as strong winds and huge waves) and complex climates (high temperature, low temperature, and humidity). The equipment has been in high-intensity operation for a long time, and its performance, reliability, and safety requirements are extremely high. incredibly

 

2.  Selection points

 

  • Heavy-duty reinforcement and harsh environment-resistant structure: Heavy-duty marine cranes, such as shore container cranes (STS) and large offshore floating cranes, are made of ultra-high strength alloy steel, and key parts (such as booms, bases, and sling connection points) are specially reinforced to ensure that there is no structural damage under high load and high-frequency operations. In response to extreme sea conditions, wind-resistant anchoring devices and surge buffer structures are designed to improve the equipment's disaster resistance.

 

  • High-performance power and transmission system: Equipped with high-power, high-performance power devices, such as high-torque diesel engines and high-efficiency hydraulic pumps, combined with advanced frequency conversion control technology to achieve fast and accurate lifting operations. High-strength, wear-resistant transmission components, such as multi-layer stranded steel wire ropes and alloy steel drums, improve transmission efficiency and durability.

 

  • Advanced intelligence and safety protection system:

 

  • 1. Intelligent control system: integrated automation control technologies, such as remote control, automatic anti-sway, and path planning systems, reduce human operating errors and improve operation accuracy and efficiency.

 

  • 1. All-round protection: In view of the marine environment, protective devices that are high temperature, low temperature, moisture, and salt spray resistant are configured. A complete fault warning system is installed to monitor equipment operation data in real-time, predict faults in advance, and alarm. Multiple safety devices, such as emergency braking and overload protection, are set to ensure operation safety.

 

  • Convenient maintenance design: It adopts a modular and easy-to-disassemble structure, is equipped with a centralized lubrication system and a quick-change interface, which is convenient for maintenance; it is equipped with a remote maintenance terminal to support technicians to guide maintenance and shorten fault handling time remotely.

 

Extreme Operation Frequency and Intensity Scenarios

 

 

1. Scenario Analysis

 

Extreme operation frequency and intensity scenarios, such as deep-sea emergency rescue and nuclear waste transfer at sea from atomic power plants, require extremely high operation intensity and place extremely stringent equipment safety and reliability requirements. Any equipment failure may lead to serious consequences, and it is necessary to ensure that the offshore craneis foolproof in extreme environments and high-intensity operations.

 

(II) Selection points

 

  • Redundant design and high-reliability structure: Key components (such as the power, brake, and control systems) adopt dual or multiple redundant configurations. When a component fails, the spare component switches seamlessly to ensure operation continuity. The structural design follows military or nuclear power standards, and the stress distribution is optimized through finite element analysis to ensure the integrity of the equipment under extreme working conditions.

 

  • Special materials and processes: Special performance materials are selected, such as radiation-resistant stainless steel (nuclear power plant scenarios) and high-strength, low-temperature resistant alloy steel (polar operation scenarios); the manufacturing process strictly follows high-standard processes and conducts 100% non-destructive testing to ensure equipment quality.

 

  • Multiple safety assurance and emergency systems: Equipped with multiple safety interlocking devices, emergency shutdown systems, independent escape routes, etc.; formulate detailed emergency plans and conduct regular actual combat drills. At the same time, independent emergency energy systems (such as large-capacity lithium battery packs) should be set up to ensure that the equipment can still complete key safety operations when the main power fails. 

 

 

Our Products

 

mobile harbour crane1

Rubber-Tired Mobile Port Crane

telescopic boom crane 1

Telescopic boom deck crane

personnel crane2

Personnel Lifting marine crane

fixed boom crane 2

Fixed boom ship crane