The core difference between inland river and deep sea floating cranes

Sep 25, 2025

Leave a message

I. Core Differences Between Inland River and Deep-Sea Floating Cranes: 4 Key Aspects

 

1. Equipment Design Adaptability

Inland River Floating Cranes: Based on non-self-propelled barge hulls, featuring a flat-bottom structure with a shallow draft (typically 1-3 meters). This design adapts to narrow and shallow inland waterways to avoid grounding. No complex stability control systems are required, as inland waters are relatively calm and do not demand strong wind and wave resistance.

Deep-Sea Floating Cranes: Mostly equipped with self-propelled deep-water hulls, adopting a streamlined design with a deep draft (over 5 meters) to withstand deep-sea swells. They are equipped with high-precision mooring systems and dynamic positioning (DP) systems, capable of withstanding winds of Beaufort Scale 10 or above to cope with complex deep-sea environments.

 

2. Lifting Capacity and Operational Performance

Inland River Floating Cranes: Medium lifting capacity (50-800 tons), focusing on loading and unloading efficiency. Suitable for lifting conventional heavy loads such as inland bulk cargo (coal, sand, gravel) and small-to-medium bridge components. They have a small operating radius, rely on tugboats for movement, and are fixed using simple anchor chains.

Deep-Sea Floating Cranes: Ultra-large lifting capacity (hundreds to thousands of tons), specialized in heavy lifting tasks. Capable of handling ultra-large equipment such as offshore wind turbine towers and oil platforms. Equipped with built-in propulsion systems, they can sail independently over long distances and achieve precise positioning using DP systems, offering high operational flexibility.

 

3. Cost and Maintenance Difficulty

Inland River Floating Cranes: Low cost (several million to tens of millions of RMB), simple maintenance. Only need to focus on inspecting the hull's sealing performance, with low long-term investment. Suitable for regular operation scenarios in inland waters.

Deep-Sea Floating Cranes: Extremely high cost (hundreds of millions to billions of RMB), complex maintenance. Regular inspections and maintenance of stability control systems and anti-corrosion coatings are required to resist deep-sea corrosion and strong impacts, resulting in significantly higher overall costs.

 

4. Applicable Scenario Boundaries

Inland River Floating Cranes: Restricted to inland water areas, such as loading and unloading of bulk cargo at inland ports (coal, sand, gravel), lifting of small-to-medium components for river-crossing bridges (e.g., the Beijing-Hangzhou Grand Canal Bridge), and salvage of sunken ships in inland waters with a water depth ≤ 20 meters.

Deep-Sea Floating Cranes: Focused on deep-sea areas, including the installation of towers and nacelles for offshore wind power projects, salvage of sunken ships/aircraft in deep and distant seas, and construction and maintenance of deep-sea oil platforms.

 

 
Our factory & equipment
 
floating crane 1
floating crane 5
deck crane

 

 

 

II. Core Selection Logic: Precise Matching Based on Water Area Requirements

 

1. Choosing Inland River Floating Cranes: Focus on "Narrow/Shallow Waters + Regular Operations"

For operations in inland rivers (e.g., the Yangtze River) involving bulk cargo loading/unloading or lifting of small-to-medium bridge components, inland river floating cranes are the priority. The key selection factor is "draft depth," which must match the minimum water level of the waterway. Additionally, models with quickly replaceable lifting attachments are preferred to improve operational efficiency.

 

2. Choosing Deep-Sea Floating Cranes: Focus on "Open Waters + Heavy-Duty Tasks"

For deep-sea operations involving heavy-duty projects such as offshore wind power and oil platforms, deep-sea deck cranes are a must. The core factors to consider are "wind and wave resistance level" and "lifting capacity" to ensure resistance to harsh deep-sea weather. For remote operation sites, self-propelled deep-sea floating cranes are recommended to reduce reliance on tugboats.

 

III. Typical Cases: Intuitive Verification of Differences

 

Inland River Case: During the renovation of an inland river bridge, an 800-ton inland river floating crane, leveraging its shallow draft advantage, successfully completed the "mid-air flipping" lifting of a 320-ton steel truss piece in a narrow waterway. No complex positioning systems were needed, demonstrating precise adaptation to inland operation environments.

 

Deep-Sea Case: In an offshore wind power project, a 5,000-ton self-propelled deep-sea floating crane, relying on its DP system, stably lifted a 600-ton wind turbine tower amid Beaufort Scale 8 winds. It sailed independently to the operation site and completed deployment within 2 hours, fully demonstrating its advantages in deep-sea operations.

 

why choose us
 

One-stop shopping for marine machinery.

factory new

why choose our products

 

Our company specializes in the design, production, and sales of marine machinery. Our main products include marine cranes, harbor cranes, dock hoppers, container spreaders, container turners, crane grabs, and more. With 13 years of experience in this industry, we have a rich history and rich experience.

 

We provide pre-sales consultation, order design and production, and after-sales technical support. We can fully solve all your pre-sales and after-sales problems and relieve your worries.

 

Our offshore cranes are certified by all major classification societies, and their quality is recognized worldwide. This gives you peace of mind when buying and using them.