Upper beam and lower beam: the skeletal support in the structure of offshore cranes

Jun 26, 2025

Leave a message

In the vast body of the offshore crane, the upper and lower beams are like the spine and pelvis of the human body, silently shouldering the key mission of support and force transmission. They are not only related to the structural stability of the marine crane, but also directly affect the safety and reliability of offshore operations. ​

 

1. Upper beam: the "backbone" Bearing the core load.

 

The upper beam is located at the core of the ship crane's superstructure and mainly bears the vertical and horizontal loads of the boom system, slewing mechanism, and hoisting load. Its structural design must take into account both strength and lightness. It is usually welded with high-strength low-alloy steel (such as Q690, AH36). The beam's anti-buckling and anti-torsion capabilities are enhanced by the reasonable arrangement of stiffening ribs and partitions. In truss cranes, the hinge between the upper beam and the boom is subject to huge concentrated forces. Cast steel nodes are often used here to strengthen the connection and ensure that fatigue fracture does not occur during frequent luffing operations. For example, when hoisting an offshore wind turbine tower, the upper beam must evenly transfer tens of tons of weight to the slewing bearing, and any structural defects may lead to catastrophic consequences. ​

 

2. Lower support beam: the "rock" of a stable foundation.

 

As the connecting hub between the marine crane and the base or hull, the primary function of the lower support beam is to safely transfer the load of the superstructure to the foundation and resist the dynamic impact caused by wind, waves, and hull shaking. Its structure is primarily a box-type section, filled with high-strength concrete or equipped with honeycomb partitions to improve the overall rigidity. The connection method between the lower support beam and the base is particularly critical. High-strength bolts or welding are often used to fix them, and rubber vibration isolation pads are used to reduce vibration transmission. In mobile offshore cranes, the lower support beam must also integrate the drive device of the walking mechanism. Hence, the shear and torsional stresses caused by power transmission must also be considered. For example, when a self-propelled deck crane is operating in waves, the lower support beam must withstand the alternating loads caused by the swaying of the hull, and its fatigue life directly determines the service life of the equipment. ​

 

3. Special design: Coping with extreme marine environment​

 

(i) Anti-corrosion protection system​ The upper and lower beams are exposed to high salt fog and high humidity environments for a long time, and require multi-layer anti-corrosion coatings: the primer is epoxy zinc-rich paint to provide electrochemical protection; the intermediate paint uses epoxy micaceous iron paint to enhance the shielding effect; the topcoat uses polyurethane paint to resist ultraviolet aging. Some high-end products also use thermal spraying of metal zinc-aluminum coatings to extend the anti-corrosion cycle significantly. ​

 

(ii) Structural strengthening measures​ . For stress concentration areas (such as beam corners and openings), arc transitions, reinforcement plates, and other designs are used to reduce local stress peaks. Flexible hinge supports are often set at the connection between the lower beam and the column to allow the structure to deform within a specific range and alleviate the impact of dynamic loads. ​

 

4. Synergy: Ensure safe and efficient operation

 

The upper and lower beams do not work independently, but cooperate to form a complete force transmission path through the slewing bearing, columns, and other components. When the offshore crane lifts heavy objects, the upper beam transfers the load to the slewing bearing, which is then dispersed to the lower beam through the columns and finally borne by the base or hull. This step-by-step transmission mechanism ensures smooth force flow and avoids local overload. At the same time, the stiffness matching of the two directly affects the dynamic response of the ship crane.

 

Reasonable design can reduce the swing amplitude of the boom and improve the lifting accuracy. ​ By deeply understanding the structural characteristics and functions of the upper and lower beams, we can glimpse the secret of the stable operation of offshore cranes. These seemingly simple beam structures embody the wisdom of material science, mechanical design, and engineering practice, and are an essential line of defense to ensure the safety of offshore operations.